Phi 16 Phi 40 double cavity pipe production line
(a) SJSZ65/132 conical twin screw extruder
1), frame
Steel and sheet metal welding, and the response to the treatment, there is a higher steel, deformation is small.
2), gear box
Product design using zbj19009-88 under the technical specifications, gear and shaft parts with high strength alloy steel, gear precision grade 6 in gb10095-88, tooth surface hardness HRC-6. At the output shaft end configuration is main standard specification of the thrust bearing, thrust bearing screw, bearing and oil seal all uses domestic high-quality products, the bearing capacity is higher, stable transmission, low noise and high efficiency.
A. reduction ratio: 39:1
B. input power: 37KW
C. by grinding hardened gear, low noise, long life, reliable operation
D. oil lubrication system
3), material barrel and screw
A. material barrel and screw material are 38CrMoAlA high quality steel
B. nitriding depth: 0.4-0.7mm, hardness: 780HV, 850HV,
C. bardiameater: head 65mm, head of 132mm
D. screw length: 1430mm
E. screw speed: 0 ~ 37rpm
F. screw thread surface roughness: 0.4um
G. material barrel surface roughness: 0.4um
4), heating system (heater)
A. cylinder with 4 sets of heaters, the head of the 6 District heater
B. heating power supply: 3-AC3800V, 50HZ,
Stainless steel cover with C. heater
5), cooling device
A. cylinder with 3 groups of centrifugal fan cooling, 320W/ area
B. fan power supply: 50HZ, 3-AC380V,
6), main motor
A. motor power: 37KW
B. motor and the host installation
C. power supply: 3-AC3800V, 50HZ,
D. motor synchronous speed 1500rpm
7), quantitative feeding device and hopper:
A. steel circular hopper,
B. quantitative feeding method: screw type quantitative feeding
C. quantitative feeding speed control mode: 1.1Kw frequency conversion speed regulation
8), head flange:
A. 45# forged steel lining and hard chromium plating processing, and the connection head six angle bolts
B. surface blackening treatment
9), electrical control cabinet:
A. power supply: 3-AC380V, 50HZ
B. group: holip frequency converter inverter Danvers
C. temperature control: 10 area, digital temperature controller
D. independent cabinet
(two), SJSG-2-63 plastic pipe forming machine
1).
A. effective length 5000mm
B. vacuum pump 2.2kW two
C. pump 1.5KW one
2). Track type 4 traction machine
A. track number 2 - a total of 4
B. drive power 1.5kw frequency conversion speed regulation
Effective length of C. crawler clip 1200mm
D. traction pipe range 16 ~ 40mm
E. maximum pulling force 1500N
F. traction speed of 0 ~ 5m/min
3). On the stroke saw blade 2 position cutting machine
A. cutting range from 16 to 40mm
B. maximum cutting wall thickness 6mm
C. cutting motor power 075kw
D. cutting logic
4). Detachable receiving station 3000mm
(three) forming die section
The special PVC pipe head, pipe to the range of 16 ~ 40mm in diameter, a multi core design.